Aerated concrete autoclave (also called AAC autoclave or autoclave for AAC blocks ) is an industry pressure vessel widely used in building materials, chemical industry, medicine rubber and so on. Usually, it will use steam as working medium based on the product performance requirement. Products will be inside the AAC autoclave. Under the condition of high temperature, The aerated concrete autoclave will generate physical and chemical reaction to reach expectation requirement. There are a lot of steam when aerated concrete autoclave working.
Is it worthwhile to recover steam from aerated concrete autoclave? Recently aerated concrete manufactures have paid great attention on this.
In order to save the manufacture costs, lots of users want to recover the extra steam during the production. But is it worthwhile to recover, let us discuss.
Is it worthwhile to recover steam from AAC autoclave? The answer is absolutely YES. It will need add an specifically recover device on the aerated concrete autoclave. The aerated concrete autoclave is connected with a precuring room through the first pipeline, there will also have a pneumatic valve on the first pipe line between AAC autoclave and precuring room. It will equip one steam heater in precuring room, one side connect with the first pipeline, the other side will connect with the first steam trap.
The AAC autoclave is connected with a precuring room through the first pipeline by adopt the above technology program. The aerated concrete autoclave steam will enter into precuring room, it will need a lot of steam during the precuring process. This process can save the resource waste and recover the steam by setting up this device. There will have a pneumatic valve on the first pipe line that drive under the gas compress. The pneumatic valve have a simple structure, compressed gas will drive it. The pneumatic valve will open when the aerated concrete autoclave release the steam, it can conduction. The pneumatic valve will be closed when the aerated concrete autoclave not work. There will have a steam heater device in precuring room. It will realize the steam heat by connect with the first pipe line to rise the suitable temperature for the products. Suitable temperature will be helpful to rise the products quality. This process heats the steam discharged from the autoclave for AAC blocks, the steam itself has temperature, this can save the energy usage. The another side of steam heater will connect with the first steam trap that can drain away the steam water. This process will avoid steam loss, letting the heating process balance.
As this process shows, firstly this process will be very trouble, equipments costs will rise. Secondly, the recover steam temperature can not reach the working temperature and pressure, it will need raise the pressure and temperature again. So we suggest that no need do recover treatment for aerated concrete autoclave steam.
There is a relatively clear answer as to whether the steam in the AAC autoclave is worth recovering. If you really want recover the steam, it can realize by the above technology way of adding one recover device.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.
