Technical Support for the customization, selection, installation, maintenance, usage and problem handling of supercritical equipment, composite autoclave, industrial autoclaves, storage tank, dished head, hydrogenation reactor equipment, custom pressure vessel products and related parts.

About Supercritical Foaming

About Supercritical Foaming? First let's know what is supercritical foaming? We usually call it SCF shortly.Its principle is to inject supercritical fluid (such as carbon dioxide or nitrogen) into the polymer melt or solution to form uniform bubbles under high pressure. These bubbles expand as the pressure decreases, forming a foam with a microporous structure. [...]

By |2023-11-24T06:30:08+00:00November 24th, 2023|Technical Support|Comments Off on About Supercritical Foaming

Advantages of the Vacuum Autoclave Process

Vacuum autoclave is one of the most common composite autoclave. According to the different production process, the type of composite autoclave selected is also different. Advantages of the Vacuum Autoclave Process 1. Constant temperature, adjustable: The inside of large vacuum autoclave is heated by circulating hot [...]

By |2022-05-31T06:49:21+00:00May 31st, 2022|Technical Support|Comments Off on Advantages of the Vacuum Autoclave Process

Introduction of Pressure Vessel Welding Type

Pressure vessel welding is a process in which two separate pressure vessel iron and steel objects are combined to form a whole by combining atoms (molecules) with the help of energy. Most of the materials used to make pressure vessels are steel. And most of them are ordinary carbon steel and low-alloy structural steel. [...]

By |2021-11-04T02:23:08+00:00November 4th, 2021|Technical Support|Comments Off on Introduction of Pressure Vessel Welding Type

Main Manufacturing Process of Industrial Pressure Vessel

About manufacturing process of industrial pressure vessel( also called pressure vessel) mainly includes the preparation of raw materials. Such as marking, blanking, forming, welding, non-destructive testing, hydraulic testing, etc. 1.Preparation of Raw Materials Steel must be pretreated before marking. Pretreatment of steel refers to the purification, orthopedic and protective primer of steel plates pipes [...]

By |2021-10-21T05:45:19+00:00October 21st, 2021|Technical Support|Comments Off on Main Manufacturing Process of Industrial Pressure Vessel

How to Operate the Pressure Vessel Hydraulic Test?

  The pressure vessel hydraulic test shall be presided over by the person in charge of the maintenance. The operation person shall be responsible for the operation. And the maintenance person shall be responsible for the inspection.  Hydraulic Test Process   First of all, the pressure vessel hydraulic test plug the inlet and outlet of [...]

By |2021-09-09T03:20:31+00:00September 9th, 2021|Technical Support|Comments Off on How to Operate the Pressure Vessel Hydraulic Test?

Process of Clad Dished Head Hot Press Forming

  Clad dished head is one kind of dish head, as a part of pressure vessel, connected with shell using welding type. For example, there are spherical shape, oval shape, torispherical shape, spherical crown shape, cone shape and flat shape, etc. According to the different clad dished head geometry . In welding, clad dished [...]

By |2021-07-02T02:02:02+00:00June 28th, 2021|Technical Support|Comments Off on Process of Clad Dished Head Hot Press Forming

How to Avoid Composite Autoclave Machine Accidents?

Composite autoclave machine (also called carbon fiber autoclave) is a kind of pressure vessel equipment. Users should pay special attention to the safety of related pressure vessel operation during its use, except the safety of conventional equipment. The main manifestation is the explosion or explosion caused by the of hyperpressure inside the autoclave machine or [...]

By |2020-11-20T05:34:52+00:00November 18th, 2020|Technical Support|Comments Off on How to Avoid Composite Autoclave Machine Accidents?

Why Laboratory Autoclave More and More Popular?

The laboratory autoclave (also called laboratory composite autoclave) is a small autoclave for carbon fiber. The composite autoclave is mainly used in universities, research institutions and other laboratories .To study the optimal control parameters (temperature, pressure and vacuum degree process) of prepress molding process, and to prepare composite one-way plates, laminated plates and small [...]

By |2021-06-21T08:01:51+00:00October 24th, 2020|Technical Support|Comments Off on Why Laboratory Autoclave More and More Popular?

Application of Large Size Autoclave Tank

Large size autoclave tank (also called composite autoclave or carbon fiber autoclave) is applied in some aerospace composite materials parts such as aircraft wings. The large size autoclave tank is the necessary processing equipment for all these parts due to its integral forming process. We will give an introduction of large size autoclave tank [...]

By |2020-10-15T11:34:36+00:00October 15th, 2020|Technical Support|Comments Off on Application of Large Size Autoclave Tank

Technical Process of Carbon Fiber Yarn Oven

The curve of carbon fiber yarn oven (also called composite autoclave) matrix resin mainly influence by resin molecular structure, also influenced by other components such as curing agent, cross-linking accelerator and so on. Outside conditions such as temperature, pressure and time are very important to curving process, these three datas called process parameters. Now [...]

By |2020-10-02T12:07:31+00:00September 30th, 2020|Technical Support|Comments Off on Technical Process of Carbon Fiber Yarn Oven

Title

Go to Top