Aerated Concrete Autoclave (also called AAC autoclave or industrial autoclave for AAC block) is a kind of large steam curing pressure vessel . And the key equipment to fabricate autoclaved aerated bricks and aerated concrete. Aerated Concrete autoclave is one of the our hot sale industrial autoclave products.
In early September, we went to the factory of our regular customer in Indonesia, they use it to produce light bricks for building industry, the customer showed us around the factory and how to make block bricks. Meanwhile, they have already ordered 3 sets industrial autoclave for AAC block to increase production.
Specifications
Diameter: 2000mm
Length: 32000mm
Working Pressure: 1.3mpa
Working Temperature: 195℃
Thickness: 16mm
Door Operating Way: manually swing-up double door opening
Quantity: 3 sets
Manufacturing Standard: GB150
Auxiliary Equipment
- Door Insulation and Kettle Insulation
- In-cabin Rails
- Steam Distribution Pipes
- Pressure Gauge Valves and Elbows
- On-site Display Pressure Gauges
- On-site Display Thermometers
- Safety Valves
- Blowdown Valves
- Traps
- Hand Crank Reducers
- Ball Valves
- Manual andElectric Safety Interlocks
- Condensate Drainage Device
- Control Cabinet
Structure of Autoclave AAC
- Device of aerated Concrete autoclave body: It is mainly welded by the shell and the autoclave AAC body flange. A total of 36 teeth are distributed along the circumference of the flange to engage the corresponding 36 teeth uniformly distributed on the lid of the kettle. A track is placed at the bottom of the aerated Concrete autoclave to walk or park the steamed trolley. Various tube seats and nozzles are arranged on the outside of the autoclave AAC, steam is supplied and discharged, condensed water is discharged, and various instruments and valves are installed.
- Device of the door: It is mainly welded by the flange of the door, the tooth plate and the dished head. The door is suspended by the hanging handle and the short shaft to close the autoclave.
- Swing device: It is mainly composed of shaft, cantilever beam, support plate, tie rod and etc. Installed on the top of the aerated concrete autoclave , connected to the lid of the aerated concrete autoclave by a tie rod, which functions as a suspension and rotary aerated concrete autoclave .
- Hand crank reducer: Fixed on the side of the flange of aerated concrete autoclave , it is mainly composed of a pair of turbines and a pair of bevel gear shafts. The toothed plate is engaged by the gear to drive the lid to rotate around the center, so that the teeth of the body and the lid flange can be engaged or disengaged.
- Safety interlock device: fixed on the side of the flange of it, consisting of safety handle, seat, post and ball valve. When the lid is closed, the safety handle is turned to the level so that the lid cannot be opened and the exhaust ball valve is closed accordingly. When opening the cover, first place the safety handle vertically and the ball valve will open.
- Support: used to support the aerated concrete autoclave, consisting of the intermediate support and the end support. Except for the intermediate support, the other supports can be moved along the axial direction of the AAC autoclave by means of rollers.
- Insulation: It is mainly composed of insulation material, skeleton and guard plate to prevent heat loss during use of AAC.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.
